What You Should Know Before Choosing a Truck Coolant

2

Using the right engine is crucial for the long life of your vehicle. However, the coolants suitable for trucks may not be the same as those used for small vehicles. The coolant requirements for trucks is different from that of small cars due to the heavier load they carry. It is important to know the right engine coolant to use for your truck. You want to use the recommended coolant to prevent your engine from getting damaged. Read more great facts on Peak HD, click here.

Which Coolant Should You Use?
When you start searching for truck coolants or antifreeze, you will come across various types in the market. Ethylene glycol and propylene glycol are the most common compounds used as truck coolants. Ethylene glycol is very toxic and adequate safety measures should be taken if you intend to use it as your truck coolant. The compound should not be allowed to drain into the water table. For more useful reference regarding hd elc coolant, have a peek here.

Most truckers use propylene glycol as a coolant since it is safer and recommended by the national authorities. This coolant has many uses, including in toiletries, foods and aircraft de-icing. However, both ethylene glycol and propylene glycol should not be allowed to drain into the water table.

The general rule of thumb is that the engine coolant and water should be mixed in a 50/50 ratio. Your mixture should never contain less than 40% of water. Most car and truck owners think the main reason for using a coolant is to ensure the engine does not freeze. While this is one of the functions, it is not the main one. The engine mixture ensure the freezing point stays low while the boiling point stays high. This is the most important function. If you do not use the right coolant, corrosion and rust as well as cylinder wall cavitation can result. As a result, your engine may die.

Monitor the Freezing Point
If you live in an area with cold climate, you should keep propylene glycol in a higher concentration. The compound does not lower the freezing point effectively and this is what you should keep it in high concentration. If you live in a warm climate area, you will realize that propylene glycol transfers heat fast. This is why the compound is great if you will be hauling large loads on uneven terrains.

Making the Right Mixture
Any concentrated engine coolant should not be diluted with water from a tap. This water can cause the engine to scale. Instead of faucet water, use distilled or de-ionized water to dilute the engine coolant. It is advisable to purchase pre-diluted coolant rather than a concentrated one.

You should carry out a thorough research to determine the right coolant to buy. Following the above tips will ensure you end up with the right coolant. Please view this site http://www.ehow.com/how_7608441_refill-engine-coolant.html for further details.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s